Pollen Beetle

Pollen beetles (Meligethes aeneus) are prevalent during Spring and Summer months and are a significant pest of European oilseed rape.  

Appearance 

The adult beetles are up to 2.5 mm long and bronze greenish to blue/black and highly visible against a yellow background. The larvae are creamy-white, 3-4 mm long, with a brown/black head and 3 pairs of short brown legs. The uppersides of the body of the larvae are lightly coloured with dark brown spot

Presence

Pollen beetles are a pest of the green/yellow bud stage, adults and larvae feed on developing anther in buds and pollen in flowers. Holes can be found in developing buds where the beetles have eaten through the sepals to reach the stamens. As a result, there may be widespread bud abortion and a reduction in pod-sets and blind stalks. Due to their feeding habits spring oilseed rape can be highly susceptible to the attack of pollen beetles. 

Pollen beetles tend to lay their eggs in flower buds and these hatch after 7-10 days, after this the larvae pupate in the soil. As adults emerge in mid-summer they serve as beneficial pollinators at flowering.

Damage

Pollen beetles migrate to winter oilseed rape crops from mid-March and throughout April. Eggs are laid in the flower buds and the larvae (grubs) develop within the flowers. If flowers are not open, beetles bite into and kill buds. Damage to buds declines as the flowers begin to open and pollen becomes more easily obtainable. Egg laying damage to the buds of oilseed rape can cause the flowers to drop off. Both adults and larvae feed on the pollen and nectar in the flowers. Struggling crops may produce fewer side shoots and green buds, meaning lower pollen beetle numbers could be a threat. In recent years, pollen beetles have rarely been abundant enough to warrant treatment: careful monitoring can prevent unnecessary 'insurance' sprays and preserve the efficacy of pyrethroid products.

Control recommendations

Monitor crops from green to yellow bud whenever temperature is 15ºC or higher. Don't panic spray - oilseed rape can tolerate quite a lot of damage by compensatory regrowth. Please check if the AHDB thresholds in the table below have been exceeded. Sample at least 10 plants along a 30 metre transect from the middle of the headland towards the centre of the crop and calculate the average number of beetles per plant. Once pest levels ARE ABOVE THRESHOLD treatment is justified to protect yield - apply a full rate of pyrethroid to minimise the risk of resistance development. If beetles are still active and numbers exceed the threshold three days after treatment try using an insecticide with an alternative mode of action such as indoxacarb. None of these may be used more than once in a crop.

Spraying when pest levels are low increases the risk of resistance evolving in the pest and also may kill natural enemies of the pest or other beneficial insects. Resistance to pyrethroids has been reported since 1999 in mainland Europe and is spreading in the UK.

Do NOT spray after flowering starts: the pollen beetles migrate to open flowers, away from the buds, and become pollinators rather than pests.

Treatment thresholds

Current spray thresholds for winter and spring oilseed rape are:

Plants/sq m

Pollen beetles per plant

< 30

25

30-50

18

50-70

11

>70

7

Pollen beetle larvae are attacked by parasitic wasps. 25-50% of larvae are killed by these on unsprayed crops. Where insecticides are used extensively, levels of parasitism can be considerably lower. The parasitic wasps may not be affected by insecticides applied against pollen beetle at green bud, as they arrive in crops during flowering.

 

Related Links

https://cropscience.bayer.co.uk/threats/pest-and-slugs/pollen-beetle/

Monitoring and control of pollen beetle in oilseed rape

 

Some of the text and image on this page comes from Rothamsted's Croprotect web platform at https://croprotect.com/pests/pollen-beetle

 

 

Related Organisations

Content below is from across the PEP community and is not necessarily endorsed by Stewards or by PEP

Connected Content

Integrated Pest Management (IPM)

Integrated Pest Management (IPM) is based on a diversity of pest management measures (prevention, non-chemical control, best practices for optimizing pesticide efficiency, etc.). These are combined at the farm level to enable reduced reliance on pesticides, and therefore a decrease in the exposure of the environment and people to pesticides.

Oilseed Rape

Oilseed Rape is the most widely grown break crop in the UK. The seed is crushed to produce vegetable oil and the remaining rapeseed meal is a high protein animal feed. 

Peach-Potato Aphid (PPA)

The Peach-Potato Aphid (PPA) known as Mysus persicae is known to feed on a wide range of plants including several grown as crops.  They are known to transmit viruses to crop plants including Turnips Yellow Virus (TuYV) which can lead to yield reductions in oilseed rape.

IPM Decisions

The IPM Decisions project will create an online platform that is easy to use for the monitoring and management of pests. Access the platform now at https://platform.ipmdecisions.net/ Co-funded by the Horizon 2020 Framework Programme of the European Union Under grant agreement No 817617

Pests

Invertebrate pests cause problems in agriculture when the level of injury they cause reaches a point where the crop yield is significantly reduced.   

Cabbage Stem Flea Beetle (CSFB)

The Cabbage Stem Flea Beetle (CSFB)  Psylliodes chrysocephala is a key pest on OSR in the UK and across the EU. They are specialist herbivores of plants in the crucifer's family.

Insecticides

Insecticides are a type of agrochemical used to kill, harm or deter insects that either directly infect cultivated plants/animals or that are carriers of disease. In agricultural settings, insecticides may be used in both arable and livestock husbandry situations. The classification of insecticides can occur in various ways: via their biochemical mode of action, their mode of penetration or on the basis of their chemistry. They can also come in various formulations and delivery-systems such as sprays, gels or baits.

Croprotect

App and website dedicated to pest, disease & weed identification and management.

Agronomy

This Topic doesn't yet have a Stewarded summary, but connected groups, content and organisations show below. Click the 'Ask to Join' button if you would like to be a Steward for this Topic and provide a summary of current knowledge and recommend useful resources, organisations, networks and projects. "Like" this Topic if you would like to see it prioritised for providing a wikipedia style summary.

About text formats
Write whatever you want here - this is the main section. You can add links, add pictures and embed videos. To paste text from elsewhere use CTRL+Shift+V to paste without formatting. Add videos by selecting 'Full HTML' below, copying the 'embed html' from the source page (eg Youtube), clicking 'Source' above and pasting where you want the video to appear.
You can upload an image here. It can be jpg, jpeg, gif or png format.
Upload requirements
File

You can upload a file here, such as a pdf report, or MS Office documents, Excel spreadsheet or Powerpoint Slides.

Upload requirements
Authors Order
Add Authors here - you can only add them if they already exist on PEP. Just start writing their name then select to add it. To add multiple authors click the 'Add another item' button below.

Please ensure that you have proof-read your content. Pages are not edited further once submitted and will go live immediately.

Configure the meta tags below.

Use tokens to avoid redundant meta data and search engine penalization. For example, a 'keyword' value of "example" will be shown on all content using this configuration, whereas using the [node:field_keywords] automatically inserts the "keywords" values from the current entity (node, term, etc).

Browse available tokens.
Basic tags

Simple meta tags.

The text to display in the title bar of a visitor's web browser when they view this page. This meta tag may also be used as the title of the page when a visitor bookmarks or favorites this page, or as the page title in a search engine result. It is common to append '[site:name]' to the end of this, so the site's name is automatically added. It is recommended that the title is no greater than 55 - 65 characters long, including spaces.
A brief and concise summary of the page's content, preferably 150 characters or less. Where as the description meta tag may be used by search engines to display a snippet about the page in search results, the abstract tag may be used to archive a summary about the page. This meta tag is no longer supported by major search engines.
Advanced

Meta tags that might not be needed by many sites.

Geo-spatial information in 'latitude; longitude' format, e.g. '50.167958; -97.133185'; see Wikipedia for details.
Geo-spatial information in 'latitude, longitude' format, e.g. '50.167958, -97.133185'; see Wikipedia for details.
Robots
A comma-separated list of keywords about the page. This meta tag is used as an indicator in Google News.
Highlight standout journalism on the web, especially for breaking news; used as an indicator in Google News. Warning: Don't abuse it, to be used a maximum of 7 times per calendar week!
This meta tag communicates with Google. There are currently two directives supported: 'nositelinkssearchbox' to not to show the sitelinks search box, and 'notranslate' to ask Google not to offer a translation of the page. Both options may be added, just separate them with a comma. See meta tags that Google understands for further details.
Used to rate content for audience appropriateness. This tag has little known influence on search engine rankings, but can be used by browsers, browser extensions, and apps. The most common options are general, mature, restricted, 14 years, safe for kids. If you follow the RTA Documentation you should enter RTA-5042-1996-1400-1577-RTA
Indicate to search engines and other page scrapers whether or not links should be followed. See the W3C specifications for further details.
Sets a cookie on the visitor's browser. Can be in either NAME=VALUE format, or a more verbose format including the path and expiration date; see the link for full details on the syntax.
Tell search engines when to index the page again. Very few search engines support this tag, it is more useful to use an XML Sitemap file.
Control when the browser's internal cache of the current page should expire. The date must to be an RFC-1123-compliant date string that is represented in Greenwich Mean Time (GMT), e.g. 'Thu, 01 Sep 2016 00:12:56 GMT'. Set to '0' to stop the page being cached entirely.
Open Graph

The Open Graph meta tags are used to control how Facebook, Pinterest, LinkedIn and other social networking sites interpret the site's content.

The Facebook Sharing Debugger lets you preview how your content will look when it's shared to Facebook and debug any issues with your Open Graph tags.

The URL of an image which should represent the content. The image must be at least 200 x 200 pixels in size; 600 x 316 pixels is a recommended minimum size, and for best results use an image least 1200 x 630 pixels in size. Supports PNG, JPEG and GIF formats. Should not be used if og:image:url is used. Note: if multiple images are added many services (e.g. Facebook) will default to the largest image, not specifically the first one. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically. This will be able to extract the URL from an image field if the field is configured properly.
The URL of an video which should represent the content. For best results use a source that is at least 1200 x 630 pixels in size, but at least 600 x 316 pixels is a recommended minimum. Object types supported include video.episode, video.movie, video.other, and video.tv_show. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically.
A alternative version of og:image and has exactly the same requirements; only one needs to be used. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically. This will be able to extract the URL from an image field if the field is configured properly.
The secure URL (HTTPS) of an image which should represent the content. The image must be at least 200 x 200 pixels in size; 600 x 316 pixels is a recommended minimum size, and for best results use an image least 1200 x 630 pixels in size. Supports PNG, JPEG and GIF formats. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically. This will be able to extract the URL from an image field if the field is configured properly. Any URLs which start with "http://" will be converted to "https://".
The type of image referenced above. Should be either 'image/gif' for a GIF image, 'image/jpeg' for a JPG/JPEG image, or 'image/png' for a PNG image. Note: there should be one value for each image, and having more than there are images may cause problems.
The date this content was last modified, with an optional time value. Needs to be in ISO 8601 format. Can be the same as the 'Article modification date' tag.
Links an article to an author's Facebook profile, should be either URLs to the author's profile page or their Facebook profile IDs. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically.
The date this content was published on, with an optional time value. Needs to be in ISO 8601 format.
The date this content was last modified, with an optional time value. Needs to be in ISO 8601 format.
The date this content will expire, with an optional time value. Needs to be in ISO 8601 format.
Twitter Cards

A set of meta tags specially for controlling the summaries displayed when content is shared on Twitter.

Notes:
  • no other fields are required for a Summary card
  • Photo card requires the 'image' field
  • Media player card requires the 'title', 'description', 'media player URL', 'media player width', 'media player height' and 'image' fields,
  • Summary Card with Large Image card requires the 'Summary' field and the 'image' field,
  • Gallery Card requires all the 'Gallery Image' fields,
  • App Card requires the 'iPhone app ID' field, the 'iPad app ID' field and the 'Google Play app ID' field,
  • Product Card requires the 'description' field, the 'image' field, the 'Label 1' field, the 'Data 1' field, the 'Label 2' field and the 'Data 2' field.
A description that concisely summarizes the content of the page, as appropriate for presentation within a Tweet. Do not re-use the title text as the description, or use this field to describe the general services provided by the website. The string will be truncated, by Twitter, at the word to 200 characters.
By default Twitter tracks visitors when a tweet is embedded on a page using the official APIs. Setting this to 'on' will stop Twitter from tracking visitors.
The URL to a unique image representing the content of the page. Do not use a generic image such as your website logo, author photo, or other image that spans multiple pages. Images larger than 120x120px will be resized and cropped square based on longest dimension. Images smaller than 60x60px will not be shown. If the 'type' is set to Photo then the image must be at least 280x150px. This will be able to extract the URL from an image field if the field is configured properly.
The MIME type for the media contained in the stream URL, as defined by RFC 4337.