Typical yellow rust lesion on wheat, showing both active pustules and scarring.

Yellow rust is an important economic disease of wheat. Often occurring more in the east of the UK and areas with mild winters and cool, damp summer weather.

A good selection of resistant varieties and well-timed chemical applications can provide effective control of the disease and minimise losses.

Damage and Economic Importance

Infections of yellow rust can reduce yields by up to 50% in untreated, susceptible crops, due to reduced green leaf area (GLA) and enhanced water-loss from diseased leaves. This reduces the plant’s ability to photosynthesise and therefore ability to produce energy for growth, reducing yields. 

Yellow rust can be found in wheat, barley and triticale and the disease is more prevalent in the east but can be found across all the UK. Current news regarding the development of new races of yellow rust in UK regions can be seen using the AHDB UKCPVS site. The use of varietal resistance alongside well-timed fungicide sprays are usually effective in limiting yellow rust damage.

Appearance and Lifecycle

Appearance

Infections usually start in the autumn, when the characteristic yellow pustules start to appear. Starting with small individual pustules scattered randomly on young leaves they can be hard to distinguish from brown rust. On adult plants, pustule formations then elongate into larger, more obvious parallel stripes on the leaf (see image below). Initial small patches of disease (foci) can establish over winter and, in untreated crops, will expand in the spring and rapidly spread to the entire field if left untreated.

Infected leaves become more chlorotic (yellow) and then necrotic (dead) in May/June, with the right weather conditions. With severe infections, pustules can infect the ear, with masses of spores forming on the grain. 

Lifecycle

Image source: AHDB

Management Recommendations

Variety:

Selecting a resistant variety is one of the main actions to reduce prevalence of yellow rust in cereals. Finding one that matches individual grower’s requirements shouldn’t be hard to do, with AHDB’s 2022 Recommended List listing 22 varieties with a resistance rating of 8 or 9.

Diversification of varieties is advised so that not all varieties grown on a farm will be susceptible to the same races of rust, as different strains have arrived in Europe from parts of Asia in the past few years. Juvenile plant resistance (up to stem elongation) may be different to that of adult plant resistance, so this is something to be aware of. The AHDB Recommended List provides information only on the resistance of adult plants, as this is the most important stage for growers. For more detailed information on varietal resistance in addition to the RL, see the UK Cereal Pathogen Virulence Survey and the AHDB yellow rust Watch List.

 

Fungicides:

It is advised to spray as soon as disease is seen on the crop, particularly on susceptible varieties, as epidemics can take-off as early as March. In these cases, a T0 spray application is advised.

Information on current fungicide efficacy is available from the AHDB – see page 11. And in this information on Fungicide Performance.

Generally, Azoles (DMIs; e.g. prothioconazole) should be used at full label dose and mixed with other modes of action such as, SDHIs (e.g. bixafen), strobilurins (e.g. pyraclostrobin) and spiroketalmines (e.g. spiroxamine). Azoles are best used as protectants or at early stages of infection against yellow rust.

 

Cultural Controls:

As P. striiformis requires living plant material to survive, volunteers should be eradicated from the crop to remove the green bridge over winter.

Delaying drilling, if using susceptible varieties, can also help to reduce disease pressure. However, this should not be done with resistant varieties, as the younger wheat plants are more susceptible to infection.

 

Related Links 

 

Some of the text on this page comes from Rothamsted's Croprotect web platform at https://croprotect.com/diseases/yellow-rust-of-wheatThis page is also supported by funding from The British Society for Plant Pathology (BSPP).

Related Organisations

Content below is from across the PEP community and is not necessarily endorsed by Stewards or by PEP

Connected Content

Puccinia triticina is specific to wheat. Other pathotypes can affect barley, rye and triticale. 

Commonly known as Septoria or Septoria leaf blotch, this is the most damaging foliar disease in the UK for Winter Wheat. With a carefully constructed fungicide programme and use of Integrated Pest Management (IPM), disease pressure can be managed and losses greatly reduced.  

Rapid crop disease detection. SwiftDetect can reveal the level of disease in your crop even in the latent period, with results in 1 business day.

Cereal diseases affecting wheat, barley, oats, rye, triticale and maize can be caused by a variety of factors, including fungal, bacterial or viral infections, pests and insects, and environmental stress.

Crop profitability depends on maximising margins, rather than yield alone. Deciding on the optimum crop protection strategy in the spring requires judgement of the variety, its situation, and how yield affecting diseases can be controlled. ADAS with the support of the AHDB and the wider industry set up the first Fungicide Margin challenge in 2019. Since then a total of 10 trials have been carried out over 3 years, allowing entrants to pit innovative strategies against others, against an ADAS experts' programme and against an untreated crop in replicated plot trials. The aim being to achieve the highest margin over fungicide cost.   

Net blotch of barley (causal pathogens: Pyrenophora teres f. sp. teres (Net form); P. teres f.sp. maculata (spot form). Net blotch affects a wide range of grasses, however, the forms on barley are specific to that crop and do not affect other crops. 

Triticale is a cross between wheat and rye. It has been shown to be a high yielding relatively low input crop that can do well in second cereal and less fertile conditions, but its adoption is hampered by lack of a reliable consistent market.

Guide published by BASF and AHDB, written with ADAS & Rothamsted, providing a complete reference book for cereal diseases. 

The AHDB Recommended List is part of the fabric of arable farming and is the engine drivi

The AHDB Recommended Lists for cereals and oilseeds (RL) publications and resources provide infor

Spring barley, as opposed to winter barley, is planted in the spring and harvested in the summer or early autumn.

Wheat is the most widly grown crop in the UK. Nationally yields average around 8 t/ha/

AHDB fungicide performance work provides high-quality, independent information on the efficacy of

The UK Cereal Pathogen Virulence Survey (UKCPVS) uses pathogen isolates from infected cereal leaf

Write whatever you want here - this is the main section. You can add links, add pictures and embed videos. To paste text from elsewhere use CTRL+Shift+V to paste without formatting. Add videos by selecting 'Full HTML' below, copying the 'embed html' from the source page (eg Youtube), clicking 'Source' above and pasting where you want the video to appear.
You can upload an image here. It can be jpg, jpeg, gif or png format.
Upload requirements

You can upload a file here, such as a pdf report, or MS Office documents, Excel spreadsheet or Powerpoint Slides.

Upload requirements
Authors Order
Add Authors here - you can only add them if they already exist on PEP. Just start writing their name then select to add it. To add multiple authors click the 'Add another item' button below.

Please ensure that you have proof-read your content. Pages are not edited further once submitted and will go live immediately.

Configure the meta tags below.

Use tokens to avoid redundant meta data and search engine penalization. For example, a 'keyword' value of "example" will be shown on all content using this configuration, whereas using the [node:field_keywords] automatically inserts the "keywords" values from the current entity (node, term, etc).

Browse available tokens.

Simple meta tags.

The text to display in the title bar of a visitor's web browser when they view this page. This meta tag may also be used as the title of the page when a visitor bookmarks or favorites this page, or as the page title in a search engine result. It is common to append '[site:name]' to the end of this, so the site's name is automatically added. It is recommended that the title is no greater than 55 - 65 characters long, including spaces.
A brief and concise summary of the page's content, preferably 150 characters or less. Where as the description meta tag may be used by search engines to display a snippet about the page in search results, the abstract tag may be used to archive a summary about the page. This meta tag is no longer supported by major search engines.

Meta tags that might not be needed by many sites.

Geo-spatial information in 'latitude; longitude' format, e.g. '50.167958; -97.133185'; see Wikipedia for details.
Geo-spatial information in 'latitude, longitude' format, e.g. '50.167958, -97.133185'; see Wikipedia for details.
Robots
A comma-separated list of keywords about the page. This meta tag is used as an indicator in Google News.
Highlight standout journalism on the web, especially for breaking news; used as an indicator in Google News. Warning: Don't abuse it, to be used a maximum of 7 times per calendar week!
This meta tag communicates with Google. There are currently two directives supported: 'nositelinkssearchbox' to not to show the sitelinks search box, and 'notranslate' to ask Google not to offer a translation of the page. Both options may be added, just separate them with a comma. See meta tags that Google understands for further details.
Used to rate content for audience appropriateness. This tag has little known influence on search engine rankings, but can be used by browsers, browser extensions, and apps. The most common options are general, mature, restricted, 14 years, safe for kids. If you follow the RTA Documentation you should enter RTA-5042-1996-1400-1577-RTA
Indicate to search engines and other page scrapers whether or not links should be followed. See the W3C specifications for further details.
Tell search engines when to index the page again. Very few search engines support this tag, it is more useful to use an XML Sitemap file.
Control when the browser's internal cache of the current page should expire. The date must to be an RFC-1123-compliant date string that is represented in Greenwich Mean Time (GMT), e.g. 'Thu, 01 Sep 2016 00:12:56 GMT'. Set to '0' to stop the page being cached entirely.

The Open Graph meta tags are used to control how Facebook, Pinterest, LinkedIn and other social networking sites interpret the site's content.

The Facebook Sharing Debugger lets you preview how your content will look when it's shared to Facebook and debug any issues with your Open Graph tags.

The URL of an image which should represent the content. The image must be at least 200 x 200 pixels in size; 600 x 316 pixels is a recommended minimum size, and for best results use an image least 1200 x 630 pixels in size. Supports PNG, JPEG and GIF formats. Should not be used if og:image:url is used. Note: if multiple images are added many services (e.g. Facebook) will default to the largest image, not specifically the first one. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically. This will be able to extract the URL from an image field if the field is configured properly.
The URL of an video which should represent the content. For best results use a source that is at least 1200 x 630 pixels in size, but at least 600 x 316 pixels is a recommended minimum. Object types supported include video.episode, video.movie, video.other, and video.tv_show. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically.
A alternative version of og:image and has exactly the same requirements; only one needs to be used. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically. This will be able to extract the URL from an image field if the field is configured properly.
The secure URL (HTTPS) of an image which should represent the content. The image must be at least 200 x 200 pixels in size; 600 x 316 pixels is a recommended minimum size, and for best results use an image least 1200 x 630 pixels in size. Supports PNG, JPEG and GIF formats. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically. This will be able to extract the URL from an image field if the field is configured properly. Any URLs which start with "http://" will be converted to "https://".
The type of image referenced above. Should be either 'image/gif' for a GIF image, 'image/jpeg' for a JPG/JPEG image, or 'image/png' for a PNG image. Note: there should be one value for each image, and having more than there are images may cause problems.
The date this content was last modified, with an optional time value. Needs to be in ISO 8601 format. Can be the same as the 'Article modification date' tag.
The date this content was last modified, with an optional time value. Needs to be in ISO 8601 format.
The date this content will expire, with an optional time value. Needs to be in ISO 8601 format.

A set of meta tags specially for controlling the summaries displayed when content is shared on Twitter.

Notes:
  • no other fields are required for a Summary card
  • Photo card requires the 'image' field
  • Media player card requires the 'title', 'description', 'media player URL', 'media player width', 'media player height' and 'image' fields,
  • Summary Card with Large Image card requires the 'Summary' field and the 'image' field,
  • Gallery Card requires all the 'Gallery Image' fields,
  • App Card requires the 'iPhone app ID' field, the 'iPad app ID' field and the 'Google Play app ID' field,
  • Product Card requires the 'description' field, the 'image' field, the 'Label 1' field, the 'Data 1' field, the 'Label 2' field and the 'Data 2' field.
A description that concisely summarizes the content of the page, as appropriate for presentation within a Tweet. Do not re-use the title text as the description, or use this field to describe the general services provided by the website. The string will be truncated, by Twitter, at the word to 200 characters.
By default Twitter tracks visitors when a tweet is embedded on a page using the official APIs. Setting this to 'on' will stop Twitter from tracking visitors.
The URL to a unique image representing the content of the page. Do not use a generic image such as your website logo, author photo, or other image that spans multiple pages. Images larger than 120x120px will be resized and cropped square based on longest dimension. Images smaller than 60x60px will not be shown. If the 'type' is set to Photo then the image must be at least 280x150px. This will be able to extract the URL from an image field if the field is configured properly.
The MIME type for the media contained in the stream URL, as defined by RFC 4337.